Drilling and milling bed for various electric drills and engraving machines with a neck diameter of 43 mm, or such a body diameter.
The stand kit also includes two plastic adapter sleeves for fixing the tool with a diameter of 38 mm and 24 mm.
The tripod turns the drill into a small benchtop drill.
Lowering stroke - 60 mm.
This is enough for most simple drilling jobs, and by installing an engraving machine in the bed, you can carry out simple milling work.
The tripod consists of a base, a guide tube and a swivel head with a clamp for mounting a drill.
The lowering mechanism of the head is a toothed rack.
There is a swivel flange between the rack and pinion and the drill clamp. This way you can change the tilt angle of the tool axis.
The tripod head can be fixed to the guide tube at different heights.
The design provides a limit stop for drilling depth with a lock, as well as a stroke depth ruler.
In this model, the overhang (distance from the guide to the drilling axis) is increased to 124 mm.
The guide tube of the stand is steel, nickel-plated.
Solid cast iron base.
The upper plane of the base is milled and has diagonal grooves for the installation of a machine vice.
In fact, we have a machine table 156 x 156 mm.
The base of the rack has mounting holes in the corners for a secure fit on the workbench. On the base there are cross-shaped grooves for fixing the machine vice.
Specifications:
-
neck setting diameter: 43mm, 38mm, 24mm
-
neck height: 21 mm
-
post height: 400 mm
-
lowering stroke: 60 mm
-
overhang (distance from pipe to drilling axis): 124 mm
-
base size: 156 x 220 mm
-
table working surface size: 156 x 156 mm